1. Put a table lamp in front of the ___.
2. Put a low-power ___ into the microscope.
3. Rotate a low-power ___ into position.
4. Look through the eyepiece. Adjust the ____ until you see a bright circle of light.
5. Place a slide on the ____.
6. Fix the slide with the ____.
7. The ____ on the slide should be right above the hole of the stage.
8. Look at the microscope from the side. Turn the _____ carefully to lower the objective until it is very close to the slide.
9. Look through the eyepiece. Turn the coarse adjustment knob to raise the objective slowly until you can see an _____ of the specimen.
10. Turn the ____ to get a sharper image. The image is now in focus.
2. Put a low-power ___ into the microscope.
3. Rotate a low-power ___ into position.
4. Look through the eyepiece. Adjust the ____ until you see a bright circle of light.
5. Place a slide on the ____.
6. Fix the slide with the ____.
7. The ____ on the slide should be right above the hole of the stage.
8. Look at the microscope from the side. Turn the _____ carefully to lower the objective until it is very close to the slide.
9. Look through the eyepiece. Turn the coarse adjustment knob to raise the objective slowly until you can see an _____ of the specimen.
10. Turn the ____ to get a sharper image. The image is now in focus.
Answers & Comments
Answer:
1 stoge 2 specimen clips 3 4 eyepiece 5 microscope 6 fine adjusment knob 7 objective 8 slide 9 image 10 mirror
Explanation yan yung pag kakaalam ko kung male po sorry