1. _______ is the complete sewing machine without a cabinet or stand.
2. ______ is the flat portion of the machine and beneath is the feed dog where
it is mounted, and the shuttle and lower thread are placed.
3. A part of a sewing machine that controls the looseness and tightness of
stitches is called___________.
4. A part of the sewing machine that keeps the thread in position is called
________.
5. The part of the sewing machine that holds the fabric in place while sewing
is called___________.
6. ________ is the curve part of the head containing mechanism for operating
the needle.
7. Lockstitch sewing machine is also called __________________.It is ran by
foot and may also be converted to electric power machine.
8. An over edging machine also called as_____________. It finishes the raw
edges of the pattern for construction.
9. _____________ is used in reinforcing the opening and closing of pockets.
10. A type of sewing machine used in making buttonholes on garments is
called_______.
Answers & Comments
1.Head is the complete sewing machine without a cabinet or stand
2.Bed is the flat portion of the machine and beneath is the feed dog where it is mounted, and the shuttle and lower thread are placed.
3. Tension Regulator (7)
This dial controls the tension on the top thread. With proper tension the top thread and bobbin thread will join together in uniform stitches. If the tension is set too tight, the stitch will pucker and break; if set too loose, the stitches will not hold.
4.Bobbin Winder Tension Disc.
This small metal disc helps to keep the thread taut as you wind a bobbin
5.Presser foot- holds fabric in place while you sew.
Comment na po ung 6-10